Search results for "Sodium sulfate"
showing 10 items of 15 documents
An electromechanical perspective on the metal/solution interfacial region during the metallic zinc electrodeposition
2009
The difficulty of studying the metal/solution interfacial region makes the use of non-conventional measurement techniques indispensable. In this way, a careful in situ study by means of acoustic impedance techniques coupled with nano-electrogravimetric techniques allowed this interface to be monitored during the metallic zinc electrodeposition process. This paper proves the formation of a viscoelastic layer consisting of ultra-hydrated Zn(II)/Zn(I) salts as a key step in the metallic zinc electrodeposition mechanism in sulfate aqueous solutions. Surprisingly, this layer is located in the metal/solution interfacial region and not on the reaction substrate. The chloride ions effect on the met…
Utilization of waste sodium sulfate from battery chemical production in neutral electrolytic pickling
2021
Abstract Several industrial activities produce metal sulfates, which are controlled by strict limitations for wastewater concentrations of sulfate. One emerging area where these activities occur is the production of lithium-ion battery chemicals in which sodium sulfates are formed because of cathode precursor co-precipitation. Several solutions for sulfate removal exist, but one option is to reuse the sulfate side stream in other processes to increase circular economy and atom efficiency. In this paper, the reuse of sodium sulfate solution in a steel industry pickling solution is considered. Neutral electrolytic pickling experiments were carried out to compare the pickling behavior of the e…
Utilization of waste sodium sulfate from battery chemical production in neutral electrolytic pickling
2021
Several industrial activities produce metal sulfates, which are controlled by strict limitations for wastewater concentrations of sulfate. One emerging area where these activities occur is the production of lithium-ion battery chemicals in which sodium sulfates are formed because of cathode precursor co-precipitation. Several solutions for sulfate removal exist, but one option is to reuse the sulfate side stream in other processes to increase circular economy and atom efficiency. In this paper, the reuse of sodium sulfate solution in a steel industry pickling solution is considered. Neutral electrolytic pickling experiments were carried out to compare the pickling behavior of the electrolyt…
Role of the co-surfactant nature in soybean w/o microemulsions.
2008
Abstract The influence of the co-surfactant on physicochemical properties of w/o soybean oil microemulsions (MEs) has been studied. In spite of the similarity in phase diagrams, the MEs display remarkable differences when examined by electrical conductivity, dynamic light scattering (DLS), small angle X-ray scattering (SAXS) and linear voltammetry. When different short-chain alcohols were employed as co-surfactants, together with sodium dodecyl sulfate (SDS) as surfactant, the DLS results indicated the systems to be monodisperse. Both the electrical conductivity of the MEs and the hydrodynamic radii of the droplets (RH) increased with water content while RH diminished as temperature increas…
Hydrolysis and chemical speciation of (C2H5)2Sn2+, (C2H5)3Sn+ and (C3H7)3Sn+ in aqueous media simulating the major composition of natural waters
2001
The hydrolysis of (C 2 H 5 ) 2 Sn 2+ , (C 2 H 5 ) 3 Sn + and (n-C 3 H 7 ) 3 Sn + has been studied, by potentiometric measurements ([H + ]-glass electrode), in NaNO 3 , NaCl, NaCl/Na 2 SO 4 mixtures and in a synthetic seawater (SSWE), as an ionic medium simulating the major composition of natural seawater, at different ionic strengths (0 ≤ I ≤ 5 mol dm -3 ) and salinities (15 ≤ S ≤ 45), and at t = 25 °C. Five hydrolytic species for (C 2 H 5 ) 2 Sn 2+ , three for (C 2 H 5 ) 3 Sn + and two for (C 3 H 7 ) 3 Sn + are found. Interactions with the anion components of SSWE, considered as single-salt seawater, are determined by means of a complex formation model. A predictive equation for the calcul…
Influence of sulphite on the passivation of iron
1991
Abstract Mossbauer spectroscopy and electrochemical measurements were used to study the passivation of iron and steels in a sulphite containing solution. The potentiodynamic curves show that passivation occurs at −140 mV potential vs saturated calomel electrode ( sce ). The main phase of the passive layer was found to be γ-FeOOH, while FeSO 4 ·H 2 O on the surface and FeSO 3 ·3H 2 O inside the layer were identified as minor phases in the case of polarization in a solution of pH 3.37. Only γ-FeOOH was observed on the surface of samples polarized at pH 6.6.
Gas chromatographic evaluation of pesticide residue contents in nectarines after non-toxic washing treatments
2004
Washing with aqueous solutions of citric acid, ethanol, glycerol, hydrogen peroxide, potassium permanganate, sodium metabisulfite, sodium laurylsulfate (SLS), sodium hypochlorite, and urea is evaluated for pesticide residue reduction in nectarines and compared with simple tap water washing. Residues of pesticides commonly utilized in nectarines (chlorpyrifos, fenarimol, iprodione, malathion, methidathion, myclobutanil, parathion and pirimicarb) are extracted with ethyl acetate and anhydrous sodium sulfate, extract is concentred and analyzed by GC with nitrogen-phosphorus detection. The formation of possible toxic by-products (chlorpyrifos oxon, malaoxon, methidaoxon and paraoxon methyl) is …
Comparison of adsorption equilibrium models and error functions for the study of sulfate removal by calcium hydroxyapatite microfibrillated cellulose…
2017
In the present study, the adsorption of sulfates of sodium sulfate (Na2SO4) and sodium lauryl sulfate (SLS) by calcium hydroxyapatite-modified microfibrillated cellulose was studied in the aqueous solution. The adsorbent was characterized using elemental analysis, Fourier transform infrared, scanning electron microscope and elemental analysis in order to gain the information on its structure and physico-chemical properties. The adsorption studies were conducted in batch mode. The effects of solution pH, contact time, the initial concentration of sulfate and the effect of competing anions were studied on the performance of synthesized adsorbent for sulfate removal. Adsorption kinetics indica…
Thermoanalytical studies on sodium 1,2-naphthoqoinone oximesolfonates
1991
Abstract Five sodium 1,2-nitrosonaphtholsulfonatea were prepared or purified and their thermal behaviour studied by TG, DTG and DSC. Pyrolysis MS technique was used to identify evolved gases and FTIR to characterize residuals. The water contents depended on preparation and conservation. The decomposition was analysed in three stages which can be formed by one or more steps. The final product was sodium sulfate in air at 530 °C and the mixture of carbon and sodium sulfide at 950 °C in nitrogen. The structure effects on decomposition is discussed.
Oleuropein protects against dextran sodium sulfate-induced chronic colitis in mice.
2013
The anti-inflammatory effect of oleuropein (1), the major phenolic secoiridoid in Olea europaea, was evaluated in an experimental model of chronic colitis in mice. Animals were exposed to four repeated cycles of dextran sodium sulfate in drinking water followed by a 7-day rest period. Animals receiving a standard diet supplemented with 0.25% of 1 (equivalent to 500 mg/kg/day) for 56 days exhibited a decrease of inflammatory symptoms, as reflected by improvement of disease activity index and histopathological changes. It was found that 1 decreased inflammatory cell recruitment and the release of inflammatory cytokines interleukin (IL)-1β and IL-6 with increased IL-10 levels in colon tissue. …